Skip to content
espressosizes

Sizes

Portafilter size by espresso machine: which size is yours?

Product links go to manufacturer sites; this site is not affiliated with any brand. How links work

Short answerThe Breville Bambino, Bambino Plus, Barista Express and Barista Pro take 54 mm [1] [2] [3] [4] portafilters; the Breville Dual Boiler and Gaggia Classic Pro E24 take 58 mm [5] [6]; Lelit gives the Bianca's group as 58.55 mm [7].

Last verified:

Compatibility checker

Pick a machine to see the sizes its accessories must match.

Sizes for Breville Bambino

Portafilter size
54 mm [1]
Basket inner diameter
Not found in the manufacturer documents checked
Manufacturer's tamper
54 mm [1]
Group gasket (outer × inner × thickness)
Not found in the manufacturer documents checked
  1. [1] Breville the Bambino BES450 Instruction Book (US/Canada/Mexico, PDF), retrieved 2026-09-25

Breville Bambino fit sheet

Portafilter size by espresso machine: which size is yours?
MachineSpecValue
Breville BambinoNominal portafilter sizeModel BES45054 mm [1]
Breville Bambino PlusNominal portafilter sizeModel BES50054 mm [2]
Breville Barista ExpressNominal portafilter sizeModel BES87054 mm [3]
Breville Barista ProNominal portafilter sizeModel BES87854 mm [4]
Breville Dual BoilerNominal portafilter sizeModel BES92058 mm [5]
Gaggia Classic ProNominal portafilter sizeStated for the current Classic Pro E2458 mm [6]
Lelit BiancaGroup size, as Lelit states itLelit's stated size for the LELIT58 group; not rounded to a nominal size58.55 mm [7]
De'Longhi DedicaNominal portafilter sizeNot found in the manufacturer documents checked
Rancilio SilviaNominal portafilter sizeRancilio's documents give no diameter; two specialist retailers publish this one58 mm Retailer-published [8] [9]
Ninja Luxe CaféNominal portafilter sizeNot found in the manufacturer documents checked

Checking your own parts? How to measure a filter basket and tamper.

About these sizes

A portafilter size is a nominal figure: it names a machine's group and the family of and accessories made for it. It is the first thing to check before buying a , basket, or distribution tool, because parts made for one size do not fit another. The table lists the size each manufacturer states for ten common home machines, with the document it comes from.

Lelit states the Bianca's LELIT58 group as 58.55 mm [7], a more exact figure than a nominal size, and the table gives it as Lelit states it rather than rounding it. Rancilio's documents give no diameter for the Silvia, but two independent specialist retailers publish the same figure, 58 mm Retailer-published [8] [9], so the table shows it labelled as retailer-published with both citations. For the De'Longhi Dedica and Ninja Luxe Café, no figure could be sourced that way, so those rows say so rather than repeating a number from a single shop or a forum. If you own one of these, measure the basket with calipers, or buy parts listed for your model by number.

The size does not settle every question. A portafilter also has to match the group's locking lugs, so two machines with the same nominal size can still need different portafilters. Tampers and distribution tools fit the basket's inner diameter, which can differ slightly from the nominal size in either direction. If you are not sure which model you have, the model number is on the machine's rating label, usually underneath or on the back; pick the machine in the checker to see its basket, tamper and gasket figures too.

Questions

How do I find my machine's portafilter size?

Find the model number on the machine's rating label and look it up in the table or the checker. Manufacturers usually state the size in the instruction book's parts list or on the product page, which is where the figures here come from.

Why do some machines show no size?

Because neither the manufacturer's documents nor two independent specialist retailers state one. A single shop listing, a forum post or someone's measurement can describe a different model year or an aftermarket part, so this site does not use them.

Can an adapter make a different size of portafilter fit?

No. The portafilter locks directly into the group head, so its size and lugs are fixed by the machine. What you can change is the basket inside it, within the baskets made for that portafilter.

Are all portafilters of the same size interchangeable?

Not always. Portafilters of the same nominal size can differ in their lugs, depth and spouts, so buy one listed for your model. Baskets of the same size swap more readily, though depth and rim shape still vary between makers.

Which tamper size goes with each portafilter size?

Go by the basket's inner diameter rather than the portafilter size: the tamper's base should be slightly smaller than the basket. Breville names the tampers it supplies by the same figure as the portafilter; the checker shows the manufacturer's tamper for each machine where one is stated.

Do pressurized and non-pressurized baskets come in the same sizes?

Yes: the size says whether a basket fits the portafilter, and the type decides how it brews. A basket has a single exit hole; a one has holes across its base. Each fit sheet lists the baskets its manufacturer supplies.

portafilterThe handled holder that carries the filter basket and locks into the machine's group head. Manufacturers quote a nominal portafilter size, which names the group it fits. The locking lugs (ears) must match the group too, so an aftermarket portafilter should be listed for your machine model, not only for the same size.Glossary entry

filter basketThe perforated metal cup that sits in the portafilter and holds the coffee. Two diameters matter: the outer rim, which has to suit the portafilter, and the inner diameter, which sets the size of tamper and distribution tool that will fit. Baskets are either single-wall (non-pressurized) or dual-wall (pressurized), and come in single and double sizes.Glossary entry

tamperA hand tool for pressing ground coffee into the filter basket. Tampers are sized by the diameter of the base, which has to be slightly smaller than the basket's inner diameter: a base as wide as the basket won't go in, and one much narrower leaves loose coffee around the edge.Glossary entry

pressurized basketA dual-wall filter basket. The inner wall is perforated, but coffee leaves through one small hole in the outer wall, and that restriction builds pressure even when the grind or tamp is uneven. That makes it forgiving with pre-ground coffee. Turn the basket over to tell: one small exit hole instead of a field of holes.Glossary entry

non-pressurized basketA single-wall filter basket with many small holes across its base. The resistance that builds brewing pressure comes from the coffee itself, so grind size, dose and tamping all change the shot. Also called a standard or single-wall basket. Bottomless portafilters are made for this type.Glossary entry